fits model: Escape. make: Ford. year: 2013.

( Manufacturer Part Number: 8M512M088B1A ), ( Part Type: Brake Caliper ), ( Conditions Options: Rh, Rear, W-bracket ), ( Genuine Oem: Yes ), ( Designation: Used ), ( Placement: Passenger/right ), ( Stock : 7w0497 )
The 8M512M088B1A Ford Passenger Rear Brake Caliper is a crucial component of your vehicle's braking system, specifically designed for the 2013 Ford Escape. This brake caliper is manufactured to meet the highest standards of quality and performance, ensuring a reliable and safe braking system.
The 8M512M088B1A caliper is a single-piston design, which provides adequate stopping power while minimizing weight, thereby improving fuel efficiency. The caliper housing is made of durable cast iron, providing excellent heat dissipation and resistance to corrosion. The caliper piston is coated with a high-temperature resistant sealant, ensuring seamless operation even under high-stress conditions.
The brake caliper is equipped with a brake pad wear sensor, which alerts the driver when it's time for a pad replacement. This feature not only helps extend the life of the brake pads but also ensures the safety of the vehicle and its occupants.
The 8M512M088B1A Ford Passenger Rear Brake Caliper is available in multiple part numbers, including 8M512M088B1B, 8M512M088BA, and 8M5Z2552C. These part numbers may vary depending on the specific model and year of your Ford Escape, so it's essential to ensure you're ordering the correct one for your vehicle.
In conclusion, the 8M512M088B1A Ford Passenger Rear Brake Caliper is a high-quality, reliable, and durable component that is crucial for the safety and performance of your 2013 Ford Escape. Its single-piston design, durable cast iron housing, and high-temperature resistant sealant make it an excellent choice for your vehicle's braking system.
Pros of buying a Ford 2013 Escape passenger rear brake caliper (8m512m088b1a, 8m512m088b1b, 8m512m088ba, 8m5z2552c, 536-01297r):1. OEM Part: This is an original equipment manufacturer (OEM) part, which means it's the same part that Ford used when the vehicle was manufactured. This ensures a perfect fit and optimal performance.
2. Quality Assurance: OEM parts undergo rigorous testing and quality checks to meet the manufacturer's standards. They are designed to last and provide reliable performance.
3. Warranty: OEM parts often come with a warranty, providing peace of mind and protection against defects.
4. Availability: OEM parts are widely available from authorized dealers and reputable aftermarket sources.
Cons of buying a Ford 2013 Escape passenger rear brake caliper (8m512m088b1a, 8m512m088b1b, 8m512m088ba, 8m5z2552c, 536-01297r):1. Cost: OEM parts can be more expensive than aftermarket alternatives. However, the higher cost often reflects the superior quality and performance.
2. Limited Customization: OEM parts are designed to work with the specific vehicle they are intended for, which means there may be limited options for customization.
Recommendation:If you value the peace of mind that comes with using a high-quality, OEM part, and you're willing to pay a slightly higher price, then the Ford 2013 Escape passenger rear brake caliper (8m512m088b1a, 8m512m088b1b, 8m512m088ba, 8m5z2552c, 536-01297r) is a great choice. It's a reliable, long-lasting part that will ensure optimal brake performance in your vehicle. However, if cost is a major concern, you may want to consider aftermarket alternatives, although you should be prepared for potential differences in quality and performance.
Any brackets are not included axle CV shaft: does include the nut blower motor: squirrel cage fan blade caliper: includes bracket and slides.
It may have minor scratches and clear coat peeling. Parts installed in vehicles used for commercial, racing, or off-road purposes, any purpose other than the original application.
C-max rear r. It is in average condition for the year and mileage of donor vehicle.
This for a used oem brake caliper assembly pulled from 2013 Escape with actual miles on it. This is on a case by basis. Escape rear 4 wheel disc, r.
All lubricants and fluids used must be of the type recommended by manufacturer receipts for installation items accompany claim warranty. All claims for warranty must be made within this time.
Manual transmissions do not include any part of the clutch system. Pay special attention to any options listed.
Focus rear r. Grading of parts very subjective process but our best keep uniform. If you don't know what a paint code is or where yours located, please feel free to ask.
Fuel injectors: see our part notes filler door: includes hinge. New fluids, filters, seal, and gaskets must be used in the installation of driveling component.
Transit connect rear r. I only see photos of the vehicle and not actual part you are selling. These parts are not covered under warranty: intake manifold, fuel injectors, oil pan, sensors, water pump included: throttle body, turbo, wiring harness exhaust manifold may be left on in certain cases manifold: does include turbo where applicable fan assembly: includes motors, shroud, and blades.
Please if you are unsure. It will have very minor imperfections but be in better condition than 90 of vehicles on the road.
Claims that result from accident, abuse, neglect, alteration, improper maintenance, or installation. Slides are not covered under warranty column switch: includes wiring if applicable up to the first point it can be unplugged control arm: ball joint and any bushings coolant overflow bottle: cap is included cowl vent panel: see our part notes, often sold as one side only differential carrier: does include axles door trim handle armrest. The fitment information can be confusing if you don't buy replacement parts everyday.
This is still a fairly nice looking, used wheel c condition, c-cond will have very noticeable cosmetic issues. Claims that result from overheating due to cooling system failure. Claims that result from the failure of other components.
A parts have less than 60,000 miles or 15,000 per year. Hid headlights include the bulbs and ballast hub: includes wheel studs ignition coils: see part notes interior rear view mirror: does not included bracket glued to windshield jack.
Is the right part. Common question that we get. B condition, b-cond this wheel will have some cosmetic imperfections.
B parts have more than 15,000 miles per year of age. Remote reservoirs and brackets will not be included power steering gear: includes Pittman arm rack pinion: tie rods but they are covered under warranty radio: pay special attention to our fitment.
It will have high miles or minor damage. These wheels are still guaranteed to be straight and true, just not the best looking.
Most of the time we include paint code in our part notes. If noted as assembly, it will include the lug wrench mass airflow sensor: does not housing unless pictured power steering pump: includes pulley and attached reservoir.
Whats included. Defective driveling components must be made available for inspection by AAA or a representative of while still installed in the vehicle purpose analysis before warranty coverage will considered. Many newer transmissions require a relearn programming procedure.
Best way is to match manufacturer paint code. Here are our part notes about this specific part: rh,rear,w-bracket: 536-01297R, stock 7w0497 please see the fitment section below to make sure will fit your vehicle.
B parts have average miles and condition for its age.